fixing the aurora subnautica

The fixing nails of bamboo chips were also called bamboo nails. They could be divided into two types according to their different uses: pressing nails and bolt nails. The pressing sheet nail was used to cooperate with the pressing sheet to fix the bamboo surface, while the bolt supporting nail was used to support the bolt position, such as the bottom of each wall on the support, to bear the seat force of the wall and fix the position of the wall. In addition, the bolt also secured the relevant tenon and mortise parts. The bamboo nails were generally cut into the shape of a round rod with a big top and a small bottom. Ming Dynasty furniture was often drilled with small bamboo nails from the mortise and tenon to strengthen it. The shape of the bamboo nail was required to be big at the top and small at the bottom. The cut surface was straight, the cross section of the bamboo green was slightly narrower than the bamboo yellow, and the wall thickness was equal to the width of the bamboo green surface. The specific specifications varied according to the use.

There were many ways to fix bamboo pieces. The following were some common methods: 1. [Binding method: You can use rope or thread to bind it.] He first marked the places that needed to be connected, then cut out a part that could be inserted into another bamboo, connected them together, and tied them up. 2. Plugging method: First, you need to cut off some bamboo skin at both ends to form a plug-like tip, trying to preserve the integrity of the bamboo piece as much as possible. Then, he connected the two bamboos together and inserted the peeled end into the other bamboo. Use glue, cement, or other materials to fix it. 3. [Buried head cap method: suitable for thicker bamboo.] He first made one end into a cylinder (also known as a "cap"), then cut a matching notch on the bamboo at the other end. Finally, he fastened the cap on it and secured it tightly with a tool. 4. Screw fixing method: You can use a screw to fix the bamboo pieces together. First, he laid down half of the bamboo piece, then passed the bamboo piece through the fixing incision, and then laid down half of the bamboo piece. Every five pieces were fixed once, and they were fixed with screws. These methods could be chosen according to actual needs and application scenarios.

The following fixing methods can be used to fix the bamboos together: First, special screws can be used to fix the bamboo flooring to the keels to ensure that the screws are evenly distributed and vertically fixed. In addition, special connecting pieces could be used to connect the edge of the floor to the knight board to enhance the stability of the floor. The other method was the floating installation method, which was to use the mortise and groove between the bamboo flooring boards to bite each other. There was no need to use glue or nails to adapt to the changes in the outdoor environment. In some cases, it is also possible to use a floor glue to stick the bamboo flooring to the ground, but you need to ensure that the ground is flat and dry, and use a special floor glue. It should be noted that when installing outdoor bamboo flooring, the first thing to do is to do the basic treatment work to ensure that the ground is flat, clean and dry. As for the method of fixing the bamboo to the wall, he could use nails or screws to fix the bamboo directly to the wall and add appropriate support around it. In summary, you can use screws to fix the bamboos together, but you need to pay attention to the use of appropriate screws and fixing methods.

Yes. The story is one of the main attractions. It gives purpose to your exploration. Without it, it would just be a survival game in an ocean world. But with the story, every new area you discover and every item you find could be a clue to the bigger picture. It makes the whole experience more immersive.

To advance the Subnautica story, focus on following the main objectives and clues provided. Also, pay attention to the environment and any hidden items or locations that might trigger new plot developments. Sometimes, talking to NPCs can give you important directions.

The length of the Subnautica story can vary depending on how quickly you progress and explore. But on average, it might take around 20 to 30 hours to complete the main storyline.

Subnautica is set in an underwater alien world. You crash-land on a planet mostly covered by water and have to survive, discover resources, and uncover the mysteries of the place.

The story length in Subnautica can vary depending on how quickly you progress and explore. But on average, it can take several hours to complete the main storyline.

Well, one way to advance the story in Subnautica is by completing key quests and exploring new areas. Discovering hidden locations and interacting with important characters can also move the plot forward.

Yes, Subnautica has a definite story element. You uncover the mystery of the planet and its strange happenings as you play.