Method of Maintaining Bamboo

There were two ways to breed bamboo: sowing and splitting. Sowing and reproduction was to collect mature seeds from October to November, then place the seeds in a pot and wait for them to germinate. Sub-plant reproduction was to split an adult bamboo plant into several smaller plants and then replant them in flower pots or gardens. These methods required suitable temperature, humidity, and light conditions to ensure the growth of the bamboo.

The following fixing methods can be used to fix the bamboos together: First, special screws can be used to fix the bamboo flooring to the keels to ensure that the screws are evenly distributed and vertically fixed. In addition, special connecting pieces could be used to connect the edge of the floor to the knight board to enhance the stability of the floor. The other method was the floating installation method, which was to use the mortise and groove between the bamboo flooring boards to bite each other. There was no need to use glue or nails to adapt to the changes in the outdoor environment. In some cases, it is also possible to use a floor glue to stick the bamboo flooring to the ground, but you need to ensure that the ground is flat and dry, and use a special floor glue. It should be noted that when installing outdoor bamboo flooring, the first thing to do is to do the basic treatment work to ensure that the ground is flat, clean and dry. As for the method of fixing the bamboo to the wall, he could use nails or screws to fix the bamboo directly to the wall and add appropriate support around it. In summary, you can use screws to fix the bamboos together, but you need to pay attention to the use of appropriate screws and fixing methods.

The method of trimming bamboo included the following steps: 1. Topping the top during the seedling stage would remove the top branches of the plant. Topping could be done many times to control the growth height and promote the growth of side branches. 2. Cut off the withered leaves and pests in time to avoid affecting the growth. 3. Cut the branches and leaves that are too dense, remove the branches that are too dense, the branches that are inside the chamber, and the cross-branches, so that the remaining branches and leaves have enough space to grow and increase the light transmission and ventilation. 4. For long branches, they could be cut short to maintain the overall beauty of the plant. Please note that the above answers are summarized based on the search results provided. There may be other details that need to be referred to for the specific trimming method.

There were several common methods to tie bamboo shelves. The first was the single circle method, which was suitable for situations where the diameter of the bamboo pole was not large. This method was to cross two bamboo poles, then pass one bamboo pole from the top to the bottom of the other bamboo pole, and then pass from the bottom to the top of the other bamboo pole to form a ring, and then pull the ring down. The second method was the double-circle method, which was suitable for bamboo poles with larger diameter. This method was to hold two crossed bamboo poles in one hand, then pass one bamboo pole from the top to the bottom of the other bamboo pole, and then from the bottom to the top of the third bamboo pole, forming a ring. Then, the ring was pulled down again, and the ring was pulled up again to pass under the third bamboo pole, forming a second ring. Finally, the ring was pulled tight. In addition, there was also the cross-knot binding method that was suitable for specific needs. For specific details and steps, you can refer to the provided document.

The cultivation method of martial bamboo included choosing a suitable environment, selecting suitable seedlings, formulating a reasonable maintenance plan, and trimming in time. When choosing a planting location, you should choose a place with sufficient sunlight, good ventilation, and good drainage. When selecting seedlings, choose seedlings with straight stems and complete plant shapes, and pay attention to checking whether there are pests and diseases. Making a reasonable maintenance plan included scientific planning of watering time and quantity, reasonable arrangement of fertilizer time and fertilizer dosage. During the growth of the martial bamboo, it needed to be trimmed appropriately to control the height and number of stems to ensure that the plant shape was beautiful and the leaves were lush.

There were many ways for the bamboo people to play. The following are a few common ways to play: 1. [Standing: Place the bamboo man on the ground, adjust its angle and center of gravity, and it can stand steadily.] 2. [Walking: Use your fingers to control the joints of the bamboo person. You can make it move forward, backward, left, and right.] 3. [Spinning: Spinning the Bamboo Man's body once will make it do a spinning action.] 4. [Jumping: By controlling the strength and angle of the joints, the bamboo people can jump.] 5. [Performance: You can combine multiple bamboo people to perform.] For example, he could make them dance, punch, run, and so on. In addition, there are some tips that can help you make and play bamboo people better. When cutting bamboo, a blade fixed to a vice could be used to cut bamboo more safely and accurately. When drilling, one could first use a small drill bit to make a preliminary hole, and then use a large drill bit to expand the hole diameter, so as to avoid cracking during drilling. When fixing the joint, some special glues or tools could be used, such as AM glue, Ugh glue, etc. In short, the bamboo man was an interesting toy. By controlling its joints and movements, one could create all kinds of interesting ways to play.

The bamboo seed water culture method was a method of putting bamboo seeds into water for cultivation. We can get some information about the cultivation method of bamboo seeds. According to the document [1], you can use wet tissue to germinate the bamboo seeds. First soak the seeds in water for 3-4 days, then cover the seeds with tissue, and wait for the seeds to germinate before planting. In document [6], it was mentioned that the bamboo seeds needed to be soaked in water for 24 hours in advance and then scattered into the soil. According to the document [8], the temperature and humidity needed to be controlled to keep the soil moist. In summary, the cultivation method of bamboo seeds included soaking the seeds before planting, and maintaining a suitable temperature and humidity.

There were two main ways to plant potted bamboo: sowing and splitting. If you choose to sow, you can collect mature seeds from October to November and then sow them when the temperature rises in spring. Sow the seeds evenly in the fertile and loose soil, and then keep the soil moist. In addition, the martial bamboo could also be planted by dividing the plants. The plants could be separated and replanted when the pots were changed. Whether it was sowing or splitting, it was necessary to choose fertile and loose soil and maintain suitable temperature and light conditions. At the same time, replenishing water and applying fertilizer regularly were also important techniques for potted bamboo planting.

The planting method of the martial bamboo seeds included the following steps: First, healthy, complete, and pest-free martial bamboo seeds were selected. Then, the seeds were soaked in warm water for 24 hours to promote sprouting. Next, he sprinkled the soaked seeds evenly on the surface of the moist soil and covered it with a thin layer of soil to keep the soil moist. The seeds needed a suitable temperature and humidity to germinate. They usually germinated at 25-30 degrees Celsius. Wu Zhu liked an environment with plenty of light, but he had to avoid direct sunlight. Water the soil regularly to keep it moist, but don't overwater it to prevent the roots from rotting. After a certain period of time, appropriate fertilizer suitable for the growth of the martial bamboo could be applied. The above was about the planting method of the martial bamboo seeds.

The correct way to thread the bamboo man was as follows: First, cut the bamboo into nine small pieces, one of which was slightly longer as the body, and the other eight as the hands and feet. Then, he drilled two holes on the long bamboo joint to connect his hands and feet. Next, he tied the thread to the needle, passed it through each small hole, and connected the nine sections of bamboo joints together to ensure that the thread ends passed through the holes in the legs. Finally, he drew a face on the bamboo man's head and tied two weapons to his hands. This way, the bamboo man could complete the thread and start playing.