Illustration of the trimming method of bamboo

There were three techniques to trim the bamboo: 1. Cut off the withered and infested branches;2. Cut off the dense branches;3. Cut off the long branches.

There were three techniques for cutting bamboo: 1. Cut off the withered and sick branches: During the cultivation period, some withered and sick branches and leaves will appear. These branches will affect the growth, so they need to be cut off in time to avoid affecting other healthy branches and leaves. 2. Searing the dense branches: Due to the rapid growth of the martial bamboo, the branches and leaves tend to become lush and messy. The branches and leaves should be cut appropriately. Observe the distribution of branches and leaves. Cut off a part of the dense branches, inner branches, and intersecting branches so that the remaining branches and leaves have enough space to grow. It can also increase the light transmission and ventilation of the plant and promote the later growth. Please note that the above techniques are summarized based on the search results provided and may not include all possible techniques.

Illustration was a commonly used research method in literary studies. It referred to the use of specific examples or plots to explain a certain topic or point of view. The illustration method usually chose some representative works or plots to analyze and compare to prove the accuracy of a certain theme or point of view. Illustration is very important in literary studies because it can help researchers better understand the meaning and value of a certain theme or point of view. By choosing some specific works or plots to analyze, researchers can better understand the background of the works, the author's creative intentions, the internal logic and external performance of the works, and thus better understand the entire literary system. There were many ways to use the illustration method, such as choosing literary works from different eras to compare and analyze the works of different authors in the same period, or choosing a specific theme or point of view to analyze the meaning and value of related works and plots. Illustration is an indispensable research method in literary studies. It can help researchers better understand literary phenomena and the meaning of works.

The maintenance methods of bamboo included the following aspects. First of all, the bamboo had a strong demand for light. It liked a bright environment, but it was not resistant to direct sunlight. Secondly, the bamboo liked a warm environment. The suitable growth temperature was around 18 ° C to 28 ° C to avoid large temperature changes. In addition, the bamboo had a moderate requirement for moisture. It could not be too dry or moist. It could be maintained in a moderate moist state. In addition, the bamboo required soft and fertile soil, so applying an appropriate amount of liquid fertilizer every once in a while could promote its growth. In terms of trimming, it was necessary to remove the withered leaves in time to maintain the health of the entire plant. At the same time, it was necessary to trim the leaves to maintain the orderly growth of the branches and leaves. In general, the maintenance methods of the bamboo included suitable light, temperature, moisture and nutrition, as well as timely trimming.

There were two ways to breed bamboo: sowing and splitting. Sowing and reproduction was to collect mature seeds from October to November, then place the seeds in a pot and wait for them to germinate. Sub-plant reproduction was to split an adult bamboo plant into several smaller plants and then replant them in flower pots or gardens. These methods required suitable temperature, humidity, and light conditions to ensure the growth of the bamboo.

The following fixing methods can be used to fix the bamboos together: First, special screws can be used to fix the bamboo flooring to the keels to ensure that the screws are evenly distributed and vertically fixed. In addition, special connecting pieces could be used to connect the edge of the floor to the knight board to enhance the stability of the floor. The other method was the floating installation method, which was to use the mortise and groove between the bamboo flooring boards to bite each other. There was no need to use glue or nails to adapt to the changes in the outdoor environment. In some cases, it is also possible to use a floor glue to stick the bamboo flooring to the ground, but you need to ensure that the ground is flat and dry, and use a special floor glue. It should be noted that when installing outdoor bamboo flooring, the first thing to do is to do the basic treatment work to ensure that the ground is flat, clean and dry. As for the method of fixing the bamboo to the wall, he could use nails or screws to fix the bamboo directly to the wall and add appropriate support around it. In summary, you can use screws to fix the bamboos together, but you need to pay attention to the use of appropriate screws and fixing methods.

There were several common methods to tie bamboo shelves. The first was the single circle method, which was suitable for situations where the diameter of the bamboo pole was not large. This method was to cross two bamboo poles, then pass one bamboo pole from the top to the bottom of the other bamboo pole, and then pass from the bottom to the top of the other bamboo pole to form a ring, and then pull the ring down. The second method was the double-circle method, which was suitable for bamboo poles with larger diameter. This method was to hold two crossed bamboo poles in one hand, then pass one bamboo pole from the top to the bottom of the other bamboo pole, and then from the bottom to the top of the third bamboo pole, forming a ring. Then, the ring was pulled down again, and the ring was pulled up again to pass under the third bamboo pole, forming a second ring. Finally, the ring was pulled tight. In addition, there was also the cross-knot binding method that was suitable for specific needs. For specific details and steps, you can refer to the provided document.

The cultivation method of martial bamboo included choosing a suitable environment, selecting suitable seedlings, formulating a reasonable maintenance plan, and trimming in time. When choosing a planting location, you should choose a place with sufficient sunlight, good ventilation, and good drainage. When selecting seedlings, choose seedlings with straight stems and complete plant shapes, and pay attention to checking whether there are pests and diseases. Making a reasonable maintenance plan included scientific planning of watering time and quantity, reasonable arrangement of fertilizer time and fertilizer dosage. During the growth of the martial bamboo, it needed to be trimmed appropriately to control the height and number of stems to ensure that the plant shape was beautiful and the leaves were lush.

There were many ways for the bamboo people to play. The following are a few common ways to play: 1. [Standing: Place the bamboo man on the ground, adjust its angle and center of gravity, and it can stand steadily.] 2. [Walking: Use your fingers to control the joints of the bamboo person. You can make it move forward, backward, left, and right.] 3. [Spinning: Spinning the Bamboo Man's body once will make it do a spinning action.] 4. [Jumping: By controlling the strength and angle of the joints, the bamboo people can jump.] 5. [Performance: You can combine multiple bamboo people to perform.] For example, he could make them dance, punch, run, and so on. In addition, there are some tips that can help you make and play bamboo people better. When cutting bamboo, a blade fixed to a vice could be used to cut bamboo more safely and accurately. When drilling, one could first use a small drill bit to make a preliminary hole, and then use a large drill bit to expand the hole diameter, so as to avoid cracking during drilling. When fixing the joint, some special glues or tools could be used, such as AM glue, Ugh glue, etc. In short, the bamboo man was an interesting toy. By controlling its joints and movements, one could create all kinds of interesting ways to play.

The bamboo seed water culture method was a method of putting bamboo seeds into water for cultivation. We can get some information about the cultivation method of bamboo seeds. According to the document [1], you can use wet tissue to germinate the bamboo seeds. First soak the seeds in water for 3-4 days, then cover the seeds with tissue, and wait for the seeds to germinate before planting. In document [6], it was mentioned that the bamboo seeds needed to be soaked in water for 24 hours in advance and then scattered into the soil. According to the document [8], the temperature and humidity needed to be controlled to keep the soil moist. In summary, the cultivation method of bamboo seeds included soaking the seeds before planting, and maintaining a suitable temperature and humidity.