There were several ways to connect bamboo together. First, he could use a rope or thread to tie the two bamboos together. Secondly, one could use the inserting method. One end of the bamboo was peeled to form a plug, inserted into another bamboo, and fixed with glue, cement, or other materials. In addition, one could also use the method of burying the head to cap the bamboo. One end of the bamboo was made into a cylindrical shape, and the other end of the bamboo was connected to the notch on the other bamboo. Then, they could use a tool to fix it. For smaller bamboo pieces, you can also consider using an electric welding machine to connect them. In addition, traditional carpentry techniques such as welding or screws could be used to connect the bamboo together. Using cement plinths was also a way to secure the bamboo. In addition, a self-drilling and self-suturing method could be used to connect the bamboos together by drilling holes and using steel wires or iron pins. Finally, he could use mortise and tenon structures to secure the bamboos together. In short, there were many ways to connect the bamboos together. The specific method to choose depended on the size of the bamboos and the degree of stability required.
Bamboo could be connected together in many ways. Common methods included binding, inserting, burying, welding, and bolt connection. The binding method was the most primitive and basic method of connection. It could be done with rope or thread. The inserting method required cutting off the bamboo skin at both ends of the bamboo to form a plug-shaped tip. Then, the two bamboos were connected and fixed with glue, cement, or other materials. The method of burying the head was suitable for thicker bamboo. First, one end was made into a cylinder, then a notch was cut on the other end of the bamboo, and finally, the cylinder was fastened on it. The welding method was suitable for smaller bamboo pieces, which could be connected by an electric welding machine. The bolt connection method required holes to be punched in the bamboo, and then bolts, nuts, and pads were used to connect the bamboo. These methods could be used to choose the appropriate connection method to fix the bamboo according to the needs.
Bamboo nails were a type of fixing piece used to fix bamboo furniture. According to different uses, bamboo nails could be divided into pressing nails and supporting bolts nails. The pressing sheet nail is used to cooperate with the pressing sheet to fix the bamboo surface; the bolt supporting nail is used to support the bolt position, such as the bottom of each wall on the support, to bear the seat force of the wall and fix the position of the wall. The shape of the bamboo nail was generally a round rod with a large top and a small bottom. The cut surface was straight, the cross section of the bamboo green was slightly narrower than the bamboo yellow, and the wall thickness was equal to the width of the bamboo green surface. The specific specifications varied according to the use. In Ming Dynasty furniture, bamboo nails were often used to drill small bamboo nails into the mortise and tenon to strengthen it.
The most prosperous bamboo was the Buddha's belly bamboo. The Buddha's belly bamboo symbolized good luck and rolling wealth. Its bamboo was wide and large, and each section was like an arhat stacked together. It was round and very cute. The Buddha's belly bamboo was suitable for making bonsai and was very attractive to raise at home.
The Chief Monk of Night Scripture was nailed to the cliff cave in chapter 128.
There were several ways to nail bamboo without breaking. One method was to first use a drill bit that was slightly thinner than a nail to drill a hole, and then nail it. Another method was to soak the bamboo before nailing it. Another method was to burn the nails red before nailing them into the bamboo. Another suggestion was to cut off the tip of the nail with pliers before drilling holes in the bamboo. These methods were all to reduce the risk of the bamboo splitting.
There were several ways to prevent the bamboo nails from exploding. One method was to first use a drill bit that was slightly thinner than a nail to drill a hole, and then nail it. Another method was to soak the bamboo before nailing it. Another method was to burn the nails red before nailing them into the bamboo. Another suggestion was to cut off the tip of the nail with pliers before drilling holes in the bamboo. These methods were all to reduce the risk of the bamboo splitting.
The top ten famous bamboos in China included bamboo, green bamboo, tea bamboo, water bamboo, turtle shell bamboo, Xiangfei bamboo, phoenix tail bamboo, gold-inlaid jade bamboo, square bamboo, and purple bamboo.
The small bamboo species included white bamboo, goose bamboo, grass silk bamboo, phoenix tail bamboo, filial bamboo, purple bamboo, osmanthus, square bamboo, buddi bamboo, tea pole bamboo, transfer pearl, dwarf bamboo, Guanyin palm bamboo, small fragrant bamboo, and four seasons bamboo. These small bamboo species were suitable for planting in small gardens, balconies, or indoors. They had high ornamental properties.
There were many types of bamboos that could be raised indoors, among which the common ones were Asparagus affinosus, Rich Bamboo, Lotus Leaf Bamboo, Lily Bamboo, Palm Bamboo, Luohan Bamboo, Rice Bamboo, Phoenix Bamboo, etc. The bamboo had small branches and remained green all year round. It was suitable for indoor maintenance and could absorb some harmful substances. Rich bamboo had tall stems and thick green leaves, symbolizing wealth and peace. The lotus leaf bamboo was also called Guanyin bamboo and had a high ornamental value. Other species such as lily bamboo, palm bamboo, Luohan bamboo, rice bamboo, phoenix bamboo, etc. were also suitable for indoor maintenance.
The specific information about the Ten Ornamental Bamboos was not provided. Therefore, I am unable to answer this question.