Bamboo fence manufacturing method

The manufacturing method of the foldable bamboo fence could be fixed with steel nails, linen, or bamboo strips. The specific steps were as follows: First, use a machete to cut the bamboo into bamboo boards that were 1 meter long and 3 centimeters wide. Then, according to the required length, the bamboo board was fixed to the wooden or bamboo pole with a fine hemp rope or plastic rope. Finally, he used a hammer and nails to fix the fence to the ground, completing the production of the foldable bamboo fence.

The manufacturing method of the foldable bamboo fence. First, he needed to prepare bamboo and use a machete to cut the bamboo into bamboo boards that were 1 meter long and 3 centimeters wide. Then, he used a saw to cut the bamboo board into the required height of the fence, and each section was cut open with a knife. Next, he began to weave a bamboo fence with linen rope from the middle, folded it in half from the middle and fixed it on the first bamboo board, then woven it one by one. When 15-16 bamboo fences were woven, they could be folded back and repeated for a second time, 4-6 times back and forth to make the bamboo fence stronger. Finally, repeat the steps above to make more sections of the bamboo fence as needed. In this way, a simple bamboo fence could be made.

The process of making a bamboo fence included the following steps: First, choose a bamboo of moderate diameter and saw it into bamboo strips of equal length. Then, he used a mortise and tenon tool to mortise and tenon the bamboo pieces to increase the firmness of the fence. Next, he placed the tenon bamboo fence at the location where the fence was needed, used a drill to drill holes in the ground, and fixed the bamboo fence to the ground with rope or wire to prevent it from tilting or moving. Finally, it could be decorated according to personal preferences, such as applying waterproof paint and anti-rust paint. The bamboo fence made in this way had better durability and ornamental effect.

There were many ways to weave a bamboo fence. The steps to weave a bamboo fence were as follows: First, split the bamboo into bamboo boards that were one meter long and three centimeters wide, and leave a part of the slender bamboo strips for weaving. Then, he used a saw to cut the bamboo into the required height of the fence and used a knife to cut each section. He started weaving from the middle. He took a bamboo strip, folded it in half from the middle, and attached it to the first bamboo. Then, he continued to weave it one by one. After weaving to the 15th and 16th strands, he could fold it back and repeat the weaving for the second time. He could weave it back and forth four to five times, and the section in the middle that was fixed would be finished. Then, he began to weave the next section using the same method. Finally, he used the same method to weave the third, fourth, and fifth sections. A simple bamboo fence was completed. In addition, bamboo fences of different styles could be made according to different weaving methods, such as "plain heart","sieve","hat" and "fish scale".

The method of using bamboo to build a fence was as follows: First, choose fresh bamboo. The diameter was generally between 5-10 cm, and the length could be chosen according to the needs. One had to choose a bamboo that did not have a wormhole and cut a gap diagonally at one end for cross-fixing. Then, he placed the two bamboos in a crisscross position and tied them tightly together with a rope. Make sure that the intersection point is bound firmly. At the other end of the intersection, nail the bamboo to the ground or wall to ensure that the bamboo is firmly fixed to prevent the fence from shifting or becoming unstable during use.

The bamboo fence could be made with steel nails, linen, or bamboo strips to fix the vertical poles. In addition, it could also be fixed with screws. For the specific production method, you can refer to the steps mentioned in documents [1] and [5].

Bamboo fences could be fixed in many ways. The following fixing methods could be used: fixing with nails, fixing with steel wires, fixing with wooden stakes, fixing with steel nails, linen or bamboo strips, and fixing with screws. For the specific fixing method, you can refer to the steps mentioned in documents [1],[2], and [5].

The maintenance methods of bamboo included the following aspects. First of all, the bamboo had a strong demand for light. It liked a bright environment, but it was not resistant to direct sunlight. Secondly, the bamboo liked a warm environment. The suitable growth temperature was around 18 ° C to 28 ° C to avoid large temperature changes. In addition, the bamboo had a moderate requirement for moisture. It could not be too dry or moist. It could be maintained in a moderate moist state. In addition, the bamboo required soft and fertile soil, so applying an appropriate amount of liquid fertilizer every once in a while could promote its growth. In terms of trimming, it was necessary to remove the withered leaves in time to maintain the health of the entire plant. At the same time, it was necessary to trim the leaves to maintain the orderly growth of the branches and leaves. In general, the maintenance methods of the bamboo included suitable light, temperature, moisture and nutrition, as well as timely trimming.

There were two ways to breed bamboo: sowing and splitting. Sowing and reproduction was to collect mature seeds from October to November, then place the seeds in a pot and wait for them to germinate. Sub-plant reproduction was to split an adult bamboo plant into several smaller plants and then replant them in flower pots or gardens. These methods required suitable temperature, humidity, and light conditions to ensure the growth of the bamboo.

The method of making bamboo people was as follows: First, prepare a thick bamboo and some tools, such as saws, knives, sandpaper, rulers, etc. He chose a piece of bamboo with a higher degree of aging and a harder texture. This way, the bamboo people he made would be stronger and more durable. Then, he used a saw to cut the bamboo into sections of appropriate length, each section about 10-15 cm long. Next, use a knife or sandpaper to polish the two ends of the bamboo section, and use a ruler to ensure that the length and width of each bamboo section are the same. He drilled a hole in the middle of each bamboo section, then inserted a small bamboo section as a joint, and fixed the joint with glue or bamboo nails. Assembling all the bamboo sections together to form a body shape, and using glue or rope to fix them together. Finally, he added details as needed, such as hands, feet, and head. You can use a knife or carving tool to carve details on the bamboo section, or you can use paint or colored tape to decorate it.