There were many ways to find the leaking point of a hidden pipe. There were a few common methods to try. First of all, you can check if there are water droplets or water flow by observing the water pipe color box, especially in the vertical water pipe. You can look up along the water flow trace. Secondly, he could observe the walls, the ceiling, and the ceiling of the neighbor's house for water stains or watermarks. These places usually corresponded to the location of the leak. In addition, you can check the joints of the water pipe, because these joints are often the most prone to leakage. In addition, he could also try to turn off the main switch of the water pipe, turn on the faucet and other equipment with water storage functions, and then observe whether the water meter moved. If it moved, it meant that there was a leak. If the above methods are unable to determine the leak point, it is recommended to seek a professional water pipe maintenance company for testing and repair.
To find the leaking point in the dark, you can use the following methods: 1. Observation method: If the water pipe is exposed, you can use a dry cloth to dry the water pipe and observe where there are water droplets or water flowing out. That is the leak point. If it was a vertical water pipe, one could follow the traces of water flow or observe if there were water stains or watermarks around the water pipe. 2. Turn off the water source and equipment: First turn off the main valve of the water pipe, then turn on the water tap of all the water and equipment to observe whether there is any leakage. Turn off the water tap of the toilet tank and washing machine to ensure that there is no leakage. 3. Check the water meter: After opening the main valve of the water pipe, observe whether the water meter is moving, including moving slowly. If the water meter moved, it was leaking. 4. [Tools: You can use professional instruments for testing, such as suppression testing instruments or measuring spectrum mode instruments.] The pressure tester could increase the water pressure to detect the leak point and observe whether the pressure on the dashboard had dropped. The measuring spectrum mode instrument can analyze the frequency spectrum according to the signal sent out to determine the location of the water leak. It should be noted that if the above methods cannot find the leak point, or if a more accurate location is needed, it is recommended to ask a professional to use a professional Detection Tools to detect and repair it.
We couldn't find any videos of how to find the leak in the pipe.
There were several ways to repair the leaking pipe in the bathroom. First of all, the original ceramic tiles could be removed and the base surface could be treated to remove the problem of water leakage in the waterproof layer. Then, he used the mud to level the ground and re-waterproof it. Finally, he laid the tiles. This would solve the problem of the bathroom leaking. In addition, if it was a problem with the water pipes, he could consider changing the hidden pipes to open pipes. In addition, if the bathroom is damp, the ceiling can be replaced with a waterproof PVP buckle to effectively prevent moisture and prevent steam from entering the hidden pipe and causing water leakage. To determine which side was leaking, one could observe the color of the floor tiles to determine if there was water. If there was already a leak, it was recommended to contact the property management of the community for repair. Don't deal with it yourself to avoid problems. During maintenance, it was necessary to find the leaking point. It could be located by professionals using ultrasonic audiometer and thermal imaging detector equipment, and then repaired and sealed. After the repairs were completed, they needed to wait for the walls and tiles to dry before they were restored to their original state. The cost of maintenance varied from city to city, generally around 1,000 - 3,000 yuan.
The cost of repairing a leaking pipe varied according to the region and service company. The price of repairing a leaking pipe was generally between 200 yuan and 1000 yuan. The specific price would be affected by the region. For example, the cost of repairing a leaking pipe in Beijing was generally around 500 to 1000 yuan per square meter, while the cost in Shanghai was around 400 to 800 yuan per square meter. In addition, if the pipeline needed to be replaced or a large area of excavation was required, the cost might be even higher. Therefore, if you need to solve the problem of leakage of the hidden pipe, it is recommended to consult a local professional service company to obtain an accurate quote.
The leaking pipes in the walls could be repaired by property management or renovation companies. If there was a leak in the original building's drainage pipe or the submerged bay, the property management office would be responsible for repairing and compensating for the relevant responsibilities. If the damage was caused during the renovation, the person who caused the damage would be responsible according to the responsibility. If the water supply pipe or the drainage pipe laid during the renovation leaked, the renovation company would be responsible for maintenance and compensation. During the guarantee period, the owner upstairs could be responsible for compensation and repair as soon as possible. For tenants who rented a house, they could check the lease contract. Usually, the tenant was responsible for maintaining the pipes and equipment in the wall. They needed to contact the landlord or real estate agency to pay for the repair costs. For the owners of their own homes, the leakage of the hidden pipes in the walls was their own responsibility. They could find qualified professionals to repair them.
There were several ways to solve the problem of water leakage in the home decoration. First of all, he could consider changing the exposed pipe, which was to cut off the loose connection between the leaking hidden pipe and the main pipe, and then re-install it with the exposed pipe. This way, he could avoid breaking the wall and the ground. In addition, if it was confirmed that the hidden water pipe was damaged, it would need to be repaired by a local professional. They would use professional instruments to measure the location of the leak and repair it according to the situation. If it was a leak in the bathroom's hidden water pipe, it might be caused by improper construction. The original ceramic tiles could be removed and the base surface cleaned, and then waterproof. When repairing a hole, you can choose a suitable repair method, such as using glue, sealants, waterproof tape, etc. After fixing the holes, the pipes needed to be checked for other problems, such as aging and corrosion. They needed to be replaced or repaired in time. Pay attention to the maintenance and maintenance of the pipeline at ordinary times. Check the pipeline regularly to see if there are any problems to avoid water leakage and other situations.
There were several ways to repair the leaking water pipe. One could try to repair it without damaging the wall tiles. First of all, he could determine the location of the leak by pressing down. Close the water intake valve, use the pressure pump to pressure the water pipe, and observe whether the pointer of the pressure gauge drops to determine the location of the water leakage point. After finding the leaking point, he needed to dig the wall and replace the leaking pipe. When repairing, pay attention to protecting the furniture and floor, cut off the damaged pipes and cover them with the interface, and connect the new pipes with the interface. Finally, he used a fuser to fuse the new pipe. If the above methods could not fix the leakage problem, it might be necessary to destroy the wall tiles to repair it.
The horizontal drainage pipes shall be connected with the horizontal drainage pipes by oblique three-way, oblique four-way or three-way and four-way along the water. To be specific, the connection between the horizontal sewage pipes should not be made with a straight three-way or a straight four-way, but with an inclined three-way or an inclined four-way or a straight three-way or a straight four-way. These connections could ensure the normal operation and drainage effect of the drainage pipeline.
The main pipe, main pipe, and branch pipe had different definition and functions in the water supply system. The following conclusions: The main pipe referred to the pipe section from the indoor main valve (or water meter) to the water supply standpipe. It was usually in the form of a standpipe, responsible for guiding water from the water source to various locations in the building. The main water supply line was usually the main water supply line in the system and could span multiple floors. The main pipe referred to the pipe section from the water source to the most unfavorable point. The most unfavorable point could be the farthest water distribution point or the highest water distribution point. The main pipe was usually in the form of a vertical pipe or a horizontal pipe, because it must have small pipes that were divided from other pipes. These small pipes were branch pipes. The function of the main pipe was to connect the pipe section of the household pipe and the branch pipe to carry out up and down transportation. The branch pipe was a water distribution pipe on the same floor, starting from the main pipe and ending at the water distribution valve of the faucet or sanitary ware. The branch pipe was usually a horizontal pipe that connected to sanitary ware or other water points. In summary, the main pipe, the main pipe, and the branch pipe have different meanings and functions in the water supply system. The main pipe was the main water supply line, the main pipe was the pipe section that connected the household pipe and the branch pipe to transport water up and down, and the branch pipe was the water distribution pipe on the same floor.
Horizontal branch pipes and horizontal main pipes were two types of pipes in the drainage system of buildings. The horizontal branch pipe was a horizontal pipe section connecting the sewage collection device drain pipe and the vertical drainage pipe, and was used to send sewage from the sewage collection devices to the vertical drainage pipe. The horizontal branch pipe should have a certain slope to facilitate smooth drainage. The horizontal main pipe was a pipe section that connected several drainage vertical pipes to the discharge pipe, mainly to receive the drainage of the horizontal branch pipe. The connection point of the horizontal branch pipe and the horizontal main pipe has a certain distance from the bottom of the vertical drainage pipe to ensure the normal operation of the drainage system. The specific connection requirements could refer to the relevant specifications and design standards.